Header menu link for other important links
X
Numerical investigation of contrasting flow physics in different zones of a high-lift low preßure turbine blade
, Cui J., Tucker P.G.
Published in American Society of Mechanical Engineers (ASME)
2015
Volume: 2C
   
Abstract
Using a range of high fidelity large eddy simulations, the contrasting flow physics on the suction surface, preßure surface and endwalls of a low preßure turbine blade (T106A) was studied. The current paper attempts to provide an improved understanding of the flow physics over these three zones under the influence of different inflow boundary conditions. These include: (a) the effect of wakes at low and high turbulence intensity on the flow at mid-span and (b) the impact of the state of the incoming boundary layer on endwall flow features. On the suction surface, the preßure fluctuations on the aft portion significantly reduced at high Free-Stream Turbulence (FST). The instantaneous flow features revealed that this reduction at high FST is due to the dominance of 'streak-based' transition over the 'Kelvin-Helmholtz' based transition. Also, the transition mechanisms observed over the turbine blade were largely similar to those on a flat plate subjected to preßure gradients. On preßure surface, elongated vortices were observed at low FST. The poßibility of the co-existence of both the Görtler instability and the severe straining of the wakes in the formation of these elongated vortices was suggested. While this was true for the cases under low turbulence levels, the elongated vortices vanished at higher levels of background turbulence. At endwalls, the effect of the state of the incoming boundary layer on flow features has been demonstrated. The loß cores corresponding to the paßage vortex and trailing shed vortex were moved farther from the endwall with a turbulent boundary layer when compared to an incoming laminar boundary layer. Multiple horse-shoe vortices, which constantly moved towards the leading edge due to a low-frequency unstable mechanism, were captured. Copyright © 2015 by ASME.
About the journal
JournalProceedings of the ASME Turbo Expo
PublisherAmerican Society of Mechanical Engineers (ASME)
Open AccessNo