Header menu link for other important links
X
Evolution of flame-kernel in laser-induced spark ignited mixtures: A parametric study
Published in Elsevier Inc.
2016
Volume: 164
   
Pages: 303 - 318
Abstract
The present work focuses on the early stages of flame-kernel development in laser-induced spark ignited mixtures issuing out of a Bunsen burner. The time-scale of 3 μs to 1 ms associated with the flame-kernel evolution stage of an ignition event is targeted in this work. A CH4/air mixture (equivalence ratio φ = 0.6) is studied as a base case, and compared with CH4/CO2/air (mole fractions = 0.059/0.029/0.912, respectively) and CH4/H2/air (mole fractions = 0.053/0.016/0.931, respectively) mixtures for nearly the same adiabatic flame temperature of 1649 K. The spatio-temporal flame-kernel evolution is imaged using planar laser induced fluorescence of the OH radical (OH-PLIF), simultaneously with H-alpha emission from the plasma. The H-alpha emission suggests that the plasma time-scale is well below 1 μs. The PLIF images indicate all the stages of kernel development from the elongated kernel to the toroidal formations and the subsequent appearance of a front-lobe. The different time-scales associated with these stages are identified from the rate of change of the kernel perimeter. The plasma is followed by a supersonic kernel-perimeter growth. Larger flame-kernel spread is found in the case of CH4/H2 mixtures. A distinct shift in the trends of evolution of LIF intensity and kernel perimeter is observed as the fuel concentration is varied near the lean flammability limit in CH4/air (φ = 0.35-0.65) and H2/air (φ = 0.05-0.31) mixtures. The flow velocity (Reynolds number, Re) effect in both laminar and turbulent flow regimes (Re = ~600-6000) indicates that the shape of the flame-kernel changes at higher velocities, but the size of the kernel does not change significantly for a given time from the moment of ignition. This could be due to a balance between two competing effects, namely, increase in the strain rate that causes local extinction and thus decreases the flame-kernel growth, and increase in the turbulence levels that facilitates increased flame-kernel surface area through wrinkling, which in turn increases the flame-kernel growth. © 2015.
About the journal
JournalData powered by TypesetCombustion and Flame
PublisherData powered by TypesetElsevier Inc.
ISSN00102180
Open AccessNo
Concepts (32)
  •  related image
    Flow velocity
  •  related image
    Free radicals
  •  related image
    Mixtures
  •  related image
    Reynolds number
  •  related image
    Strain rate
  •  related image
    Time measurement
  •  related image
    FLAME KERNEL
  •  related image
    H-ALPHA
  •  related image
    LASER IGNITION
  •  related image
    LASER-INDUCED SPARKS
  •  related image
    OH PLIF
  •  related image
    Adiabatic flame temperature
  •  related image
    Carbon dioxide
  •  related image
    Fuel
  •  related image
    Hydroxyl radical
  •  related image
    Methane
  •  related image
    Adiabaticity
  •  related image
    Air
  •  related image
    Article
  •  related image
    Combustion
  •  related image
    FLAME
  •  related image
    FLAME KERNEL
  •  related image
    Flammability
  •  related image
    Flow rate
  •  related image
    Fluorescence
  •  related image
    Gas
  •  related image
    Laser
  •  related image
    PERIMETER
  •  related image
    Priority journal
  •  related image
    Temperature
  •  related image
    Turbulent flow
  •  related image
    Velocity