Suresh Krishnamoorthy Seshadri

Carbon steel

Corrosion resistance

Electrodeposition

Electroless plating

Hardness

Heat treatment

Metallic matrix composites

Nickel alloys

Particles (particulate matter)

Polarization

Silicon nitride

Synthesis (chemical)

Composite coatings

POTENTIODYNAMIC POLARIZATION

Coatings

IIT Madras is a public technical and research university located in Chennai, Tamil Nadu. Founded in 1959, it is recognised as an Institute of National Importance.

IIT Madras has been ranked as the top engineering institute in India for four years in a row by the National Institutional Ranking Framework of the MHRD

It currently offers undergraduate, postgraduate and research degrees across 16 disciplines in Engineering, Sciences, Humanities and Management. About 596 faculty belonging to science and engineering departments and centres of the Institute are engaged in teaching, research and industrial consultancy.

IIT Madras

Synthesis and Corrosion Behavior of Electroless Ni–P– Si3N4 Composite Coatings

Journal of Materials Science Letters

The formation of electrodeposited Ni-B alloy coatings using a dimethylamine borane (DMAB) modified Watt's nickel bath and evaluation of their structural characteristics, hardness and wear resistance are discussed. The boron content in the electrodeposited Ni-B alloy coating is determined by the ratio of rate of reduction of nickel and rate of decomposition of DMAB. The boron content of the electrodeposited Ni-B coating decreases as the current density increased from 0.4 to 4 A dm-2. XRD diffraction pattern of electrodeposited Ni-B coatings in their as-plated condition exhibits the presence of Ni (1 1 1), (2 0 0) and (2 2 0) reflections with (1 1 1) texture. Heat treatment at 400 °C for 1 h has resulted in the formation of nickel boride phases, which results in an increase in hardness and wear resistance. The mechanism of wear in electrodeposited Ni-B coatings is intensive plastic deformation of the coating due to the ploughing action of the hard counter disk. © 2005 Elsevier B.V. All rights reserved.

Materials Chemistry and Physics

Electrodeposited Ni-B coatings: Formation and evaluation of hardness and wear resistance

This review outlines the development of electroless Ni-P composite coatings. It highlights the method of formation, mechanism of particle incorporation, factors influencing particle incorporation, effect of particle incorporation on the structure, hardness, friction, wear and abrasion resistance, corrosion resistance, high temperature oxidation resistance of electroless Ni-P composite coatings as well as their applications. The improvement in surface properties offered by such composite coatings will have a significant impact on numerous industrial applications and in the future they will secure a more prominent place in the surface engineering of metals and alloys.

Journal of Applied Electrochemistry

Electroless Ni-P composite coatings

The present work deals with the formation of Ni-P/Ni-B duplex coatings by electroless plating process and evaluation of their hardness, wear resistance and corrosion resistance. The Ni-P/Ni-B duplex coatings were prepared using dual baths (acidic hypophosphite- and alkaline borohydride-reduced electroless nickel baths) with both Ni-P and Ni-B as inner layers and with varying single layer thickness. Scanning electron microscopy (SEM) was used to assess the duplex interface. The microhardness, wear resistance and corrosion resistance of electroless nickel duplex coatings were compared with electroless Ni-P and Ni-B coatings of similar thickness. The study reveals that the Ni-P and Ni-B coatings are amorphous in their as-plated condition and upon heat-treatment at 450 °C for 1h, both Ni-P and Ni-B coatings crystallize and produce nickel, nickel phosphide and nickel borides in the respective coatings. All the three phases are formed when Ni-P/Ni-B and Ni-B/Ni-P duplex coatings are heat-treated at 450 °C for 1h. The duplex coatings are uniform and the compatibility between the layers is good. The microhardness, wear resistance and corrosion resistance of the duplex coating is higher than Ni-P and Ni-B coatings of similar thickness. Among the two types of duplex coatings studied, hardness and wear resistance is higher for coatings having Ni-B coating as the outer layer whereas better corrosion resistance is offered by coatings having Ni-P coating as the outer layer. © 2003 Elsevier B.V. All rights reserved.

Electroless Ni-P/Ni-B duplex coatings: Preparation and evaluation of microhardness, wear and corrosion resistance

Journal	Data powered by TypesetJournal of Materials Science Letters
Publisher	Data powered by TypesetSpringer Netherlands
ISSN	02618028
Open Access	No