Shanti Bhattacharya

Department of Electrical Engineering

Akhila Vijaykumar

IIT Madras is a public technical and research university located in Chennai, Tamil Nadu. Founded in 1959, it is recognised as an Institute of National Importance.

IIT Madras has been ranked as the top engineering institute in India for four years in a row by the National Institutional Ranking Framework of the MHRD

It currently offers undergraduate, postgraduate and research degrees across 16 disciplines in Engineering, Sciences, Humanities and Management. About 596 faculty belonging to science and engineering departments and centres of the Institute are engaged in teaching, research and industrial consultancy.

IIT Madras

Applied Optics

Focused ring patterns are used for many applications like corneal surgery, micro drilling, optical trapping, etc. The generation of focused ring patterns in the earlier reported cases employed many refractive optical components with different functions. As a result the optics configurations of the ring pattern generation systems are bulkier. In diffractive optics, it is possible to alter a function of an element and also integrate multiple functions in a single element. In this paper, we present the design, fabrication and evaluation of single and composite diffractive optical elements for the generation of focused ring patterns. A diffractive toric Fresnel zone lens was designed for parallel beam illumination. This element is compared with other composite diffractive elements capable of generating focused ring patterns. The toric Fresnel zone lens and composite elements were fabricated using electron beam direct writing. The fabricated elements were found to exhibit interesting properties, with the toric lens out-performing the other elements in several areas such as efficiency, focal depth, and ring thickness.. © 2015 SPIE.

Proceedings of SPIE - The International Society for Optical Engineering

Design, fabrication, and evaluation of diffractive optical elements for generation of focused ring patterns

The phase of a negative axicon is combined with that of a Fresnel zone lens (FZL) to obtain an element labelled as conical FZL, which can generate a focused ring pattern at the focal plane of the FZL. The phase integration is achieved by modifying the location and width of zones of FZL in accordance with the phase variation of the negative axicon. The element was designed for a high power laser with a wavelength of 1064 nm, focal length and diameter of conical FZL of 30 mm and 8 mm respectively and for a ring diameter of 50 μm. The element was fabricated using photolithography. The pattern was transferred from the resist layer to the borosilicate glass plates by dry etching to achieve an etch depth of 1064 nm. The etch depth measured using confocal microscope was 1034 nm at the central part and 930 nm for the outermost part of the device with a maximum error of 12.5% at the outermost part and 3% at the central part. The element was used in an optical trapping experiment. The ring pattern generated by the conical FZL was reimaged into the trapping plane using a tightly focusing microscopic objective. Polystyrene beads with diameters of 3 μm were suspended in deionized distilled water at the trapping plane. The element was found to trap multiple particles in to the same trap. © 2015 Copyright SPIE.

Conical Fresnel zone lens for optical trapping

Binary composite diffractive optical elements with the functions of a spiral phase plate (SPP), an axicon, and a Fresnel zone lens (FZL) were designed with different topological charges. The element was designed in two steps. In the first step, the function of an SPP was combined with that of an axicon by spiraling the periods of the axicon with respect to the phase of the SPP followed by a modulo-2π phase addition with the phase of an FZL in the second step. The higher-order Bessel beams generated by the binary phase spiral axicon are superposed at the FZL's focal plane. Although location of the focal plane is wavelength dependent, the radius of the flower-like beams generated by the element was found to be independent of wavelength. The element was fabricated using electron-beam direct writing. The evaluation results matched well with the simulation results, generating flower-like beams at the focal plane of the FZL. © 2015 Society of Photo-Optical Instrumentation Engineers (SPIE).

Optical Engineering

Compact generation of superposed higher-order Bessel beams via composite diffractive optical elements

Diffractive optics has traditionally been used to transform a parallel beam of light into a pattern with a desired phase and intensity distribution. One of the advantages of using diffractive optics is the fact that multiple functions can be integrated into one element. Although, in theory, several functions can be combined, the efficiency is reduced with each added function. Also, depending on the nature of each function, feature sizes could get finer. Optical lithography with its 1 μ m limit becomes inadequate for fabrication and sophisticated tools such as e-beam lithography and focused ion beam milling are required. Two different techniques, namely, a modulo-2π phase addition technique and an analog technique for design and fabrication of composite elements are studied. A comparison of the beams generated in both cases is presented. In order to be able to compare methods, specific functions of ring generation and focusing have been added in all cases. © 2015 Society of Photo-Optical Instrumentation Engineers.

Design of multifunctional diffractive optical elements

Higher Order Bessel Beams (HOBBs) have many useful applications in optical trapping experiments. The generation of HOBBs is achieved by illuminating an axicon by a Laguerre-Gaussian beam generated by a spiral phase plate. It can also be generated by a Holographic Optical Element (HOE) containing the functions of the Spiral Phase Plate (SPP) and an axicon. However the HOBB's large focal depth reduces the intensity at each plane. In this paper, we propose a multifunctional Diffractive Optical Element (DOE) containing the functions of a SPP, axicon and a Fresnel Zone Lens (FZL) to generate higher efficiency higher order Bessel-like-beams with a reduced focal depth. The functions of a SPP and a FZL were combined by shifting the location of zones of FZL in a spiral fashion. The resulting element is combined with an axicon by modulo-2π phase addition technique. The final composite element contains the functions of SPP, FZL and axicon. The elements were designed with different topological charges and fabricated using electron beam direct writing. The elements were tested and the generation of a higher order Bessel-like-beams is confirmed. Besides, the elements also generated high quality donut beams at two planes equidistant from the focal plane of the FZL. © 2015 SPIE.

Journal	Data powered by TypesetApplied Optics
Publisher	Data powered by TypesetOSA - The Optical Society
ISSN	1559128X
Impact Factor	1.230
Open Access	No
Citation Style	unsrt
Sherpa RoMEO Archiving Policy	Green